Research paperExperimental CharacterizationWater Aging Effects on Graphene Nanoplatelets and Multi-walled Carbon Nanotube Reinforced Epoxy Glass Fiber NanocompositesB. M. Madhu, T. V. RashmiIndian Journal of Advances in Chemical Science·2020·10.22607/IJACS.2020.801003·arXiv:2403.12654AbstractNanocomposites reinforced with hybrid fillers of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were developed, aimed at improving electrical and morphological properties of the hybrid nanocomposites while reducing the cost of the final product. In this work, the effect of short-term water aging for 1440 h on MWCNTs and GNPs reinforced epoxy glass fiber nanocomposites was studied. Epoxy nanocomposites were prepared with varying combinations of MWCNTs and GNPs (2:1, 2:2, and 2:3 wt. %) as conducting fillers and their electrical conductivity was evaluated after short-term water aging. Microstructural investigations and morphology of nanocomposites were investigated using Fourier transform-infrared spectroscopy and X-ray diffraction.Read more
Neat epoxy/glass fiber/ATH composite without conductive nanofillers (Ep+Gf).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialExpand
Epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs (CNT₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Epoxy/glass fiber/ATH composite with 1 wt.% GNPs (GNP₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 1 wt.% GNPs (H₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 2 wt.% GNPs (H₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 3 wt.% GNPs (H₃).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Pure graphene nanoplatelets reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Pure multi-walled carbon nanotubes reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Research paperExperimental CharacterizationWater Aging Effects on Graphene Nanoplatelets and Multi-walled Carbon Nanotube Reinforced Epoxy Glass Fiber NanocompositesB. M. Madhu, T. V. RashmiIndian Journal of Advances in Chemical Science·2020·10.22607/IJACS.2020.801003·arXiv:2403.12654AbstractNanocomposites reinforced with hybrid fillers of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were developed, aimed at improving electrical and morphological properties of the hybrid nanocomposites while reducing the cost of the final product. In this work, the effect of short-term water aging for 1440 h on MWCNTs and GNPs reinforced epoxy glass fiber nanocomposites was studied. Epoxy nanocomposites were prepared with varying combinations of MWCNTs and GNPs (2:1, 2:2, and 2:3 wt. %) as conducting fillers and their electrical conductivity was evaluated after short-term water aging. Microstructural investigations and morphology of nanocomposites were investigated using Fourier transform-infrared spectroscopy and X-ray diffraction.Read more
Neat epoxy/glass fiber/ATH composite without conductive nanofillers (Ep+Gf).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialExpand
Epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs (CNT₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Epoxy/glass fiber/ATH composite with 1 wt.% GNPs (GNP₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 1 wt.% GNPs (H₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 2 wt.% GNPs (H₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 3 wt.% GNPs (H₃).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Pure graphene nanoplatelets reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Pure multi-walled carbon nanotubes reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Research paperExperimental CharacterizationWater Aging Effects on Graphene Nanoplatelets and Multi-walled Carbon Nanotube Reinforced Epoxy Glass Fiber NanocompositesB. M. Madhu, T. V. RashmiIndian Journal of Advances in Chemical Science·2020·10.22607/IJACS.2020.801003·arXiv:2403.12654AbstractNanocomposites reinforced with hybrid fillers of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were developed, aimed at improving electrical and morphological properties of the hybrid nanocomposites while reducing the cost of the final product. In this work, the effect of short-term water aging for 1440 h on MWCNTs and GNPs reinforced epoxy glass fiber nanocomposites was studied. Epoxy nanocomposites were prepared with varying combinations of MWCNTs and GNPs (2:1, 2:2, and 2:3 wt. %) as conducting fillers and their electrical conductivity was evaluated after short-term water aging. Microstructural investigations and morphology of nanocomposites were investigated using Fourier transform-infrared spectroscopy and X-ray diffraction.Read more
Neat epoxy/glass fiber/ATH composite without conductive nanofillers (Ep+Gf).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialExpand
Epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs (CNT₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Epoxy/glass fiber/ATH composite with 1 wt.% GNPs (GNP₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 1 wt.% GNPs (H₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 2 wt.% GNPs (H₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 3 wt.% GNPs (H₃).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Pure graphene nanoplatelets reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Pure multi-walled carbon nanotubes reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Research paperExperimental CharacterizationWater Aging Effects on Graphene Nanoplatelets and Multi-walled Carbon Nanotube Reinforced Epoxy Glass Fiber NanocompositesB. M. Madhu, T. V. RashmiIndian Journal of Advances in Chemical Science·2020·10.22607/IJACS.2020.801003·arXiv:2403.12654AbstractNanocomposites reinforced with hybrid fillers of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were developed, aimed at improving electrical and morphological properties of the hybrid nanocomposites while reducing the cost of the final product. In this work, the effect of short-term water aging for 1440 h on MWCNTs and GNPs reinforced epoxy glass fiber nanocomposites was studied. Epoxy nanocomposites were prepared with varying combinations of MWCNTs and GNPs (2:1, 2:2, and 2:3 wt. %) as conducting fillers and their electrical conductivity was evaluated after short-term water aging. Microstructural investigations and morphology of nanocomposites were investigated using Fourier transform-infrared spectroscopy and X-ray diffraction.Read more
Neat epoxy/glass fiber/ATH composite without conductive nanofillers (Ep+Gf).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialExpand
Epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs (CNT₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Epoxy/glass fiber/ATH composite with 1 wt.% GNPs (GNP₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 1 wt.% GNPs (H₁).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 2 wt.% GNPs (H₂).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Hybrid epoxy/glass fiber/ATH composite with 2 wt.% MWCNTs and 3 wt.% GNPs (H₃).4 preparations3 characterizations4 properties3 figuresExperimentalepoxyStudied Materialglass fiberStudied MaterialAl(OH)3Studied MaterialCStudied MaterialCStudied MaterialExpand
Pure graphene nanoplatelets reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand
Pure multi-walled carbon nanotubes reference powder used for XRD comparison.1 characterization2 properties1 figureReferenceCStudied MaterialExpand